Suitable for a load of 1,2 to max. 10 watts. Therefore ideal for LED indicators. Therefore not suitable for handlebar end indicators with festoons with more than 10 watts. Please use C7145 or 1010030 here (see 'alternatives'). bgm - item number: BGM6202 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frame

We are now offering you high-quality cable lugs in bare brass for crimping and / or soldering. The bare brass is very easy to solder and corresponds to the appearance of the original wiring harness. In connection with our suitable cables, bougie tubes and shrink tubing sets, a defective cable harness can be repaired or, if necessary, even completely new. The cable lugs are [...]

Grip, cornering, directional stability, handling, wheelspin, braking behavior? All of these are demands that your chassis must be able to cope with. bgm offers the right damper for every application. The bgm PRO series offers you high tech at its best. You can not only adjust the spring tension of the black and white gas pressure shock absorbers to your individual needs, they also offer you [...]

The BGM Pro claw is made of high quality 15CrMo5 (SCM415) chrome molybdenum steel and is therefore very robust. The flanks are very tightly tolerated compared to the switching claws otherwise available on the market. This guides the claw exactly in the main shaft and effectively prevents setting / tipping. The profile for locking the gear steps has been greatly improved and [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

Spare part for the BGM PRO Superstrong coupling suitable for Lambretta LI / GP / DL. The coupling base plate has ten spring positions (five are standard) and an exact fit for use with the BGM PRO coupling spider. CNC manufactured from high-strength, nitrided steel. bgm - Item number: BGM8010NG Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]

BGM PRO STREET 2-stroke synthetic oil is a first-class and highly resilient two-stroke oil that meets the strict Japanese JASO FC test standard. Based on an excellent base oil, many high-quality additives ensure excellent protection for all components. The high classification as JASO FC makes it extremely low in smoke, perfect for use in engines with catalytic converters. The [...]

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus neither the crankshaft nor new bearings are stressed for pure measurement purposes. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1200TL Availability: out of stock (Please check [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm PRO clutch springs are made in Germany and are subject to continuous quality testing. The Oteva70® material used makes the springs block-stable and true to size. The spring does not deflect sideways until it is blocked; when relieved, it returns to its original length. The clutch spring retains its full spring force. The spring rate is significantly tighter than that of a [...]