BGM primary gears are bulletproof. Developed for the enormous power and torque of today's engines, they are made of high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) offers a reassuringly secure basis for the production of BGM primary wheels. The production meets the high [...]

Single flange plate of the BGM exhaust adapter for Vespa T5 engines. Single spare part. The outlet flange pipe is still required for completion. (US) bgm - Item number: 3330594 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,66 kg Category: Engine> Exhaust> Exhaust manifold Other customers who are interested in exhaust flange plate (for connecting pieces) - BGM Vespa [...]

BGM PRO shaft sealing rings made of high-quality and ethanol-resistant (E10) FKM / Viton® * CORRECT HEIGHT (20x62x7MM INSTEAD of 20x62x6.5MM) The coupling-side BGM PRO shaft sealing ring has an overall height of 7mm instead of the 6.5mm usual with other manufacturers. The BGM PRO shaft seal is based on the original old model from Piaggio. Anyone who takes apart an old original engine will [...]

Idle jet set -BGM PRO Dellorto 4mm- (30-52) - (30-32-35-38-40-42-45-48-50-52) bgm - item number: 7671256 Availability: in stock (Please check availability here in Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Carburetor> Carburettor nozzles Other customers who wanted auxiliary jet set -BGM PRO for Dellorto (type: 11600) 4mm- (30-52) (30-32- 35-38-40-42-45-48-50-52), also looked for: auxiliary jet set [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Adjustment screw set, suitable for the PHBN carburetor series from Dell'Orto (all from 10mm-17,5mm cross-section). Contains both the propeller and the idle screw. Incl. the springs and O-rings / seals behind it. For carburettors with a holder for an e-choke. The PHVA series is mainly used on vehicles with a Piaggio engine bgm - item number: 7673420 Availability: in stock (Please check [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

TIP: Please always assemble piston rings carefully. Piston rings made of cast material are only elastic to a limited extent and break relatively quickly. Some pistons have trapezoidally profiled piston rings (so-called keystone rings), these only fit in one installation position. If the ring does not move freely, please loosen it carefully and put it back in 'upside down'. Very helpful tools for work [...]

The bgm PRO clutch steel disks are manufactured exactly flat and allow the clutch to be separated precisely. Due to the very good concentricity, the clutch can be perfectly dosed. The steel discs are available in the original thickness of 1,5 millimeters and in a sports version with a height of just 1,0 millimeters. The sport version enables the assembly of a lamellar disc, which [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

bgm - Item number: BGM7984 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,80 kg Category: Frames> Wheels> Rims Other customers who are interested in rims -BGM PRO, tubeless, 2.10 -10 inch aluminum- Lambretta LI series 1-3, LI S, SX, TV series 2-3 - white are interested, also looked [...]

BGM original swing arm bearing set for revision of the bearing between fork and swing arm The connection between the steering tube and the front wheel swing arm is a highly stressed component on the Vespa models. Forces from all directions must be safely absorbed and transferred. The swing arm mounting is responsible for precise wheel guidance and transmits the steering impulse. Thus also a TÜV-relevant component. Camps [...]