Piaggio specific plug with enclosed contact clamps. A defective cable harness can be repaired or cable branches or entire cable harnesses can be created yourself. Simply connect the cables to the plug contact (crimp or solder with the appropriate pliers) and then push them into the plug. The contact locks in automatically and is then permanently connected to the plug. Two contacts: [...]

The BGM BigBox Touring - power for the big tour Torque from idle with the optics and acoustics like a standard exhaust The BGM BigBox Touring is the tour steamer in our range. Developed for full thrust from the lowest revs. Ideal for all original engines or moderate tuning cylinders such as BGM177 but also DR135 / 177, Pinasco or Polini [...]

Complete replacement piston kit. bgm - Item number: 5660048 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Cylinders> Pistons Other customers who are interested in pistons -BGM ORIGINAL- Piaggio 50 ccm - 40,0mm interested, also searched for: Pistons | Cylinder piston | Piston | Pistone | [...]

The bgm PRO intake manifold has been specially developed for the bgm PRO Racetour cylinder kit. Of course, it can also be used on all other cylinders with direct inlet / piston control. It was developed to be able to position a larger carburetor almost like the original. This guarantees the greatest possible distance to the side panel, which means that the larger carburetor works perfectly with the [...]

Ingenious little cable branch that enables the retrofitting of a brake light function on vehicles with disc brakes, even before the year of construction 1998. To do this, screw in a brake light switch on the brake pump (if not already present). The cable branch is suitably pre-assembled to be connected directly (incl. Rubber seal). Lead the cables through the steering head and the inside of the frame to the brake pedal and there in parallel to [...]

bgm - Item number: BGM2225HS10 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder head -BGM PRO RaceTour Ø = 70,0 , 8mm 200-way screw connection - Lambretta SX 200, TV 200, DL / GP 1,0 - XNUMXmm are interested, also looked for: Spacer | [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The pistons of the BGM177 cylinder are manufactured by the renowned Italian piston manufacturer METEOR. The piston has a high silicon content. As a result, it has less thermal expansion, is more wear-resistant and thermally very stable. PISTON RINGS Two 1mm thick piston rings, also made in Italy, minimize friction and thus increase performance and speed stability. Otherwise they are identical [...]

B-goods with scratches! Flawless new goods, see BGM7795 and BGM7795S Steering dampers are used to avoid the dangerous bumping of the handlebars when the front wheel is unloaded or lifted off. In addition, unwanted vibrations in the steering such. B. reduced commuting in a critical speed range. This speed does not necessarily have to be high, the tendency to pendulum depends on many different factors [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

BGM brake pads are manufactured by a highly specialized company in Europe. With over 40 years of manufacturing experience (e.g. Aprilia and Piaggio) and a strong commitment to racing behind him, he manufactures high-quality brake pads for BGM. BGM brake pads have a special organic pad mixture that combines very good braking performance with enormous safety reserves. The very high temperature stability for an organic covering [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]