BGM PRO silicone single seals consist of a 0,5mm thick, high-quality sealing paper. They have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the permanently flexible sealing compound. So the engine always stays tight and the oil [...]

bgm - Item number: BGM6398UB Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,17 kg Category: Frames> Cables> Cables Other customers who are interested in universal train -BGM ORIGINAL, Ø = 1.6 mm x 2500mm, sleeve = 2200mm, nipple Ø = 5.5mm x 7.5mm, inner sleeve PE, black- used as a shift cable are interested, also looked for: [...]

Special tools - Made in Germany Assemble a bearing quickly and easily like a professional. That is possible with this quality tool. The bearing is neatly guided and cannot tilt. The material is spared. Used to mount the needle roller bearing of the front brake drum of the Vespa PX, T5, Cosa and PK models. Has a paragraph [...]

Gearbox from BGM Pro for Vespa largeframe engines. Available with or without a main shaft. The gear wheels are made of high-alloy NiCrMo case-hardened steel (20NiCrMo2-2 / AISI8620) for the highest loads. This extremely good base material withstands even the highest engine performance. The precisely defined surface hardening to 58-60HRC makes the pinion permanently resistant to wear. This makes the BGM gear parts an uncompromising [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

Nozzle reamer set 12 pieces for mechanical expansion of the nozzle bore. 0,6 - 1,9mm bgm - Item number: 1800017 Availability: In stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Tools> Tools Other customers who are interested in nozzle reamer Set -UNIVERSAL Ø = 0,6-1,9mm- 12 pieces, also looked for: Nozzle reamer | Teaching | Nozzle size [...]

Allen key especially for the clamping nipples / screw nipples of the clutch and shift cables of all Lambretta models of the LI family. Also available individually. bgm - Item number: BGM6466TLX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Workshop supplies> Tools Other customers who are interested in Allen key -BGM PRO- 3.5mm- 10 pieces [ ...]

Lambretta bgm PRO MRB RaceTour piston kit with 70 mm diameter. Complete piston kit consisting of: piston, two steel piston rings each 1mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.

The BGM PRO ignition set made of high-quality components for a quick conversion of the Vespa to a maintenance-free, powerful and reliable ignition / generator unit. FEATURES Conversion from contact ignition to electronic ignition bright light already in idle voltage-stabilized 12 volt on-board network maintenance-free and reliable electronic ignition starts immediately good concentricity lighter, balanced pole wheel more power better acceleration alternator [...]

bgm - Item number: SC5010 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,50 kg Category: Engine> Ignition> Wiring harnesses Other customers who are interested in cable branch ignition coil / cable box -BGM ORIGINAL- Vespa V50, 50N, SR50, SS50, V90, SS90, PV125 are also interested in: Wiring harness | Harness | Cable set | Cable set [...]

Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]