Tapered roller bearings have a larger contact surface and are therefore significantly more resilient than conventional factory solutions with ball bearings. Tapered roller bearings can cope with the high loads of powerful braking systems much better and are also much more wear-resistant. They increase active driving safety by ensuring the ideal state of smooth, non-locking steering for a very long time. A criterion that [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Sealing kit as it is also included with the BGM cylinder kit in the same scope of delivery. Contains three foot seals and one head seal. Sealing thicknesses foot seals: 0,2mm - 0,4mm - 0,6mm aluminum head seal: 0,5mm copper With the different thicknesses of the foot seal, the control angle can be finely adjusted to the respective purpose / stroke. Spacer columns made of aluminum are also available for the head for rough spacing.

The bgm EVOLUTION crankshafts are very cleanly processed and convince with well thought-out details: performance-optimized full-beam design well balanced (special balancing that is only available with the BGM PRO shafts) stable connecting rod available with 52mm (std.) And 55mm stroke The long stroke version with 55mm stroke has a longer connecting rod (110mm instead of the 105mm series). This ensures [...]

Bgm Pro harness, better than original. Every cable harness is professionally manufactured and has solidly pressed (crimped) cable lugs. Where appropriate, they are also provided with protective shrink tubing. Loose wire ends are tinned, with the exception of the cable branch that leads to the light switch with screw clamps. For the greatest possible freedom of assembly, the cables are a little longer than required. Here [...]

High quality ignition base from BGM. Specially developed for converting contact-controlled motors to maintenance-free electronic ignition. The base plate has been modified to fit the engine housing built before 1977 and has a longer cable branch so that the ignition base plate can also be perfectly mounted on older vehicles. After the conversion, the former 6Volt on-board network has [...]

With the bgm lift kit you can improve your chassis considerably. The back of the scooter is raised by a good 4 cm. This gives you a much better steering behavior and a more favorable weight distribution. Also looks razor-sharp! All hijackers are made of solid aluminum CNC and color anodized. Can be installed in just a few minutes. When used on vehicles [...]

The fuel tap is an essential part of the fuel supply that should be in tip top condition. New spare part in OEM quality. bgm - Item number: R14402 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,08 kg Category: Frame> Tank> Fuel taps Other customers who are interested in fuel tap -BGM [...]

Only suitable for versions V1.0 and V2.0! bgm - Item number: BGM2105BR Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Exhaust> Brackets Other customers who are interested in front exhaust brackets -BGM PRO Clubman V1.0 , V2.0- Lambretta series 1-3 - silver interested, also looked [...]

High-quality thrust block made of high-strength 42CrMo4. Better and cheaper than the original. bgm - Item number: SC9000 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Gearbox> Gearbox Other customers who are looking for thrust block for shift claw -BGM PRO- Vespa V50 , V90, SS50, SS90, PV125, ET3, [...]

A complete revision set for the control cables as well as all classic Vesps, that should not be missing in any glove compartment! For the first time we can offer the otherwise very expensive individual parts as a cost-effective complete set. The whole thing in a fantastic quality. Made by a supplier for the Japanese motorcycle industry, the details of the set are impressive. The clamping screws for the [...]