bgm - Item number: BGM8521A Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,50 kg Category: Engine> Carburetor> Carburetor Other customers who are interested in carburetors -BGM ORIGINAL PHBN 12- Minarelli 50 ccm (manual choke) - AW = 23mm, also looked for: carburetor | Carburetor | Gasifier | Atomizer [...]

The BGM stainless steel rim is manufactured in Germany with high precision by a renowned and, of course, certified company. The result is a rim that even Enrico Piaggio couldn't have made better. The high-strength rim is characterized by perfect concentricity, absolute freedom from rust and a reinforced rim flange. The rim is screwed into stainless steel with the special nuts provided. Their [...]

Stud set BGM Original for cylinder assembly of the Vespa 80-150ccm smallframe and largeframe engines. Made of high tensile strength steel with a rolled (rolled) thread. In contrast to a cut thread, the surface is firmer and the thread flanks are press-polished. This results in a highly resilient and permanently durable thread. Tightening torque cylinder head screws: 13-15Nm (aluminum cylinder) Tightening torque cylinder head screws: 14-18Nm (cast iron cylinder) Scope of delivery: [...]

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM abutments are manufactured in excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Innocenti. This guarantees a perfect fit. The abutments are required to give the outer cable casing a stop on the frame or in the engine block. They are simply inserted into the corresponding hole. Uses [...]

The connecting rubbers from BGM from the carburettor to the intake manifold with the connection size Ø = 30 / 30mm are made of a very oil and petrol tolerant material, which ensures maximum reliability and durability. Carburetor and intake manifold should be thoroughly degreased before assembly. We recommend the 12mm ABA SAFE hose clamps, these should not be over tightened. Suitable for: - [...]

abcde X 01 2,48 1,20 26,00 X 02 2,50 1,80 24,00 X 03 2,46 1,60 22,00 X 04 2,48 1,80 20,00 X 05 2,46 1,80 24,00 X 06 2,50 1,20 26,00 X 07 2,50 1,80 20,00 X 08 2,50 1,40 26,00 X 09 2,50 1,40 18,00 X 10 2,50 1,40 20,00 [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

Beautiful bgm PRO Fastback bench for the LUI series. The design is perfect. The bench follows the line of the tank and it almost looks as if no other bench had ever been installed. The processing is at the usual high level of the bench from Italy. The closure is done by a magnetic mechanism

Enables the motorcycle to be parked quickly and conveniently in the garage, carport, shed, etc. Also ideal for use on a lifting platform, while the two-wheeler is being transported on the loading area of ​​a transporter or trailer. Reliably fixes the vehicle on the front wheel in a vertical position. To do this, simply drive the front wheel into the seesaw, it folds with [...]

bgm - Item number: SC2301 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,71 kg Category: Engine> Carburetor> Carburetor Other customers who are interested in O-ring for carburetor -DELLORTO 20 / 20mm SHB- Vespa PK125 XL2, also searched for: O | Ring | Oring | Sealing ring | Sealing rubber | [...]

bgm - Item number: BGM1550BS20 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Cylinder> Spacer Other customers who are interested in spacer cylinder base -BGM ORIGINAL lamp bottom- Vespa Wideframe 1953-1959, VM, VN, ACMA, VB1T, VGL1T, VL1T - 2.0mm are interested, also looked for: Spacer | [...]