MAIN IMPORTERS

CENTRAL EUROPE

THAILAND

ITALIAN

JAPAN

UNITED KINGDOM

NORTH AMERICA

SPAIN

RANDOM PRODUCTS

Tool to fix the brake drum of Vespa pulleys. The central fastening nut of the brake drum is screwed on with a high torque. This tool enables the brake drum to be fixed easily and safely in order to loosen / fasten the nut. The tool is designed so that it fits on the following scooters: Smallframe 9 "(brake drum 4-hole outside): Vespa 50R, Special Smallframe 10": [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

Clutch linings are a very important link between the engine and the transmission, and a well-functioning clutch is essential for driving enjoyment, safety and performance. Unfortunately, many manufacturers do not make the appropriate effort with such an important component with the result that the clutches go through or do not separate properly. The lining manufacturers always deliver the decent quality [...]

Cylinder base gasket -BGM PRO- 0,8mm Malossi 139ccm & 166ccm (aluminum) bgm - item number: WS5160 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Cylinder> Spacer Other customers who are interested in Spacer cylinder base -BGM ORIGINAL Malossi 139/166 cc- Vespa PX80, PX125, PX150 - 0.8mm, [...]

BGM PRO silicone sealing sets consist of a 0,5mm thick, high-quality sealing paper (like Piaggio "green" original). In addition, the seals, which are always in contact with oil, have an already applied layer of silicone sealant. This ensures increased surface pressure on the seal. In addition, the silicone seal also seals the cold engine much better thanks to the [...]

The BGM FASTER FLOW SI carburetor is based on a brand new SI24 / 24 E Dell'Orto / Spaco carburetor. This will be revised by us so that it also meets the high demands of a heavily modified engine. In order to meet the increased fuel consumption of a tuned engine, the carburettor was optimized and a modification was made to the through-hole between the shimmer chamber and the nozzle holder.

We carry indicator glasses from Piaggio, Siem, Triom as well as Bosatta and BGM. TRIOM / SIEM Both high-quality manufacturers who manufacture for Piaggio and therefore have an E-mark. The two manufacturers only differ slightly in terms of design and color. For perfect color consistency and fit, read off which manufacturer it is on the indicator body before buying. PIAGGIO Piaggio will [...]

Complete ignition system for: Aprilia: SR (Bj. 94-00), Scarabeo (Bj. 94-00), Rally, Area 51, Sonic Benelli: 491 (till Bj. 02-03), K2 (till Bj. 02-03 ), Naked, Pepe Beta: Eikon Italjet: Dragster Malaguti: F10 (up to year 93) MBK: Flipper, Nitro, Ovetto, Evolis, Fizz, Forte Yamaha: Why, Aerox, Neos, Breeze, Axis Corresponds to the original spare part, thus in very best quality. Excellent [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

Anyone who does tuning at the highest level can choose the best material available on the market when choosing their crankshaft bearings. We have put together BGM PRO bearing sets for you here. In addition to quality bearings, the kit also contains high-quality shaft seals. All bearings are C4 bearings with increased internal clearance. In contrast to the original [...]

Cable harness BGM ORIGINAL suitable for all Vespa PX models up to year of construction 1982 Italian version without battery. With this, the indicators, the horn (so-called buzzing) and all other consumers are supplied with power directly via the AC on-board network. The ignition base plate used in these vehicles is suitable for this with only 3 cables (contact ignition models) or 5 cables (vehicles).

The BGM PRO SC shock absorber series is one of the finest chassis components that you can treat your scooter to. CNC machined, high-strength aluminum (6061) which is finally equipped with an absolutely corrosion-resistant hard anodized coating, form the basis for the high-end chassis. The very stable piston rods are machined in an extremely complex manner in order to obtain perfect surfaces with ideal sliding properties. Thereby [...]