The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: BGM4590KTWH Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,24 kg Category: Frame> Brakes> Frame parts Other customers who are looking for cover brake pump set -BGM PRO, without Mirror holes- Vespa GTL125 / 200 (ZAPM311, ZAPM312), GTS125 (ZAPM313), GTS250 (ZAPM451), GTS300 (ZAPM452), GTS ie Super125 (ZAPM453), GTS ie Super300 [...]

bgm - Item number: 7673820G Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Ignition> Wiring harnesses Other customers who are interested in cable branch ignition base plate -VESPA- Vespa PX old ( 7 cables) - interested in gray cable, also searched for: cable branch | Ignition stator | Cable branch | Cable branch | [...]

bgm - Item number: BGM8090ULGS Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,83 kg Category: Motor> Clutch> Clutch baskets Other customers who are interested in clutch basket including hub (type with cone) -BGM Pro Superstrong CNC Ultralube, type Cosa2 / FL- Vespa Wideframe GS150 (VS1-VS5), GS160 (VSB1T), SS180 (VSC1T) are interested, searched [...]

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus, for pure measurement purposes, neither the crankshaft nor new bearings are stressed. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1203TL Availability: in stock (Please check the [...]

BGM flywheel nuts are made from high quality 42CrMo4. This material is extremely tensile and clearly surpasses the quality of the original nut. A tight fit of the pole wheel is ensured at all times by the high possible tightening torque. Tightening torque pole wheel nuts M10 / M11 (V50, PV, ET3, PK S, Sprint, VBB ...): 45-50 Nm M12 (PX, Rally, GS160, SS180, T5, Cosa, PK XL): 60-65 [... ]

Tuning kit to convert PX125 / 150 (and similar) engines to 177ccm. The set includes: cylinder kit BGM Pro 177 exhaust BGM Pro touring carburetor SI24 BGM Pro main jet set It is intended to obtain the best possible combination of power, torque and service life based on the series engine. The set can be used without further adjustment work (no milling, turning or grinding necessary).

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

bgm - Item number: SC2301 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,71 kg Category: Engine> Carburetor> Carburetor Other customers who are interested in O-ring for carburetor -DELLORTO 20 / 20mm SHB- Vespa PK125 XL2, also searched for: O | Ring | Oring | Sealing ring | Sealing rubber | [...]

bgm - Item number: 3333175 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,16 kg Category: Frame> Fork> Screw sets Other customers who are interested in screw set front shock absorbers -BGM ORIGINAL- Vespa Largeframe Rally, Sprint, GT / GTR, TS, GL, Super, VNA, VNB, VBA, VBB, Wideframe V30-33, VM, VN, VL, GS150 [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. The pear nipples used with the brake / clutch cable require a corresponding adapter to fit into the round cutout of the handlebar. Unfortunately there are no [...]

The BGM stainless steel rim is manufactured in Germany with high precision by a renowned and, of course, certified company. The result is a rim that even Enrico Piaggio couldn't have made better. The high-strength rim is characterized by perfect concentricity, absolute freedom from rust and a reinforced rim flange. Regardless of whether stainless steel is left in its natural state or is highly polished, both versions are [...]