MAIN IMPORTERS

CENTRAL EUROPE

THAILAND

ITALIAN

JAPAN

UNITED KINGDOM

NORTH AMERICA

SPAIN

RANDOM PRODUCTS

bgm - Item number: BGM2220HS03 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Cylinder> Spacer Other customers who are looking for Spacer cylinder head -BGM PRO RaceTour Ø = 65,0 , 8mm 125-way screw connection - Lambretta LI 150-125, LIS, SX 150-175, TV 2 (series 3-125), DL / GP 150-0,3 - XNUMXmm [...]

Cylinder head gasket -BGM PRO- 1,5mm Polini 177ccm, DR 177ccm bgm - item number: 3820047 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx who are for Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 0,02 cc- Vespa PX177, PX125, Cosa150, [...]

bgm - Item number: BGM6413FB Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,17 kg Category: Frames> Cables> Cables Other customers who are looking for front brake cables -BGM ORIGINAL- Vespa PX Lusso (Bj. 1984-97), T5 125cc - complete - black are interested, also looked for: brake cable | Brake cable | [...]

Replacement piston, for the original Vespa - 200cc cylinder. Complete with piston rings, bolts and clips, of course. Installation clearance: 0,21 (Italian dimension) bgm - item number: 9020177 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,34 kg Category: Motor> Cylinder> Piston Other customers who for piston -BGM ORIGINAL- [...]

The float level of the SI carburettors is not adjustable. If the float level is too low, it comes to full load jerks and a dangerous emaciation. This can be due to the use of a Cosa float chamber on a SI24 / 24E carburettor of the PX models. The swimmer of the Cosa lies lower and reduces the swimmer's level. The spacers offered here raise [...]

Extra hard coupling nut, made in Germany, for use with very heavily loaded drives, for example in racing. Of course, it can also be used as a high-quality replacement for the original nut in a standard engine. This very high quality special nut is suitable for all Vespa engines whose clutch sits on the auxiliary shaft (Smallframe: V50, PV, ET3, PK, PK XL, [...]

Upper spring plate for BGM Pro SC / F1 Sport shock absorber as it has been used in series since March 2017. The previously sold dampers (lot numbers SC-15F and SC-16F) use a much flatter plate (10mm height over everything). The version offered here is set lower and can be used as a conversion plate for the older dampers. This means that [...]

BGM Pro shims for the clutch are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. WHY The shim is needed to distance the clutch in the engine. It is installed under the coupling pinion and is available in thicknesses of 0,8-1,6 mm (in 0,2 mm increments). [...]

The tires are indisputably one of the most important components of our scooters. It establishes contact with the road and is therefore not only responsible for safety but also to a large extent for driving pleasure. The goal was to develop a tire with which you can iron through curves and roundabouts in wet conditions as well as in dry conditions [...]

Large upgrade kit for the primary translation of all PV125, ET3, PK80-125 S / XL / XL2 engines (can also be used in 50cc engines if a primary one with shock absorbers / springs is installed there). Consists of: CNC BGM Pro clutch basket (nitrided) CNC BGM Pro cover plate (nitrided) screw connection The set massively reinforces the primary drive and thus makes it durable for powerful engines. [...]

Side shaft BGM PRO for Vespa Largeframe PX, Rally, T5, Cosa, LML (2-stroke) Maximum stability with the best performance thanks to ideal gradations Modern cylinders such as Malossi MHR, Quattrini M244 or Pinasco 251 have the power and torque level of the Vespa largeframe motors at one Raised a completely new level. The transmission components used must be correspondingly stable. MATERIAL QUALITY The BGM PRO [...]

IGNITION CABLE BGM PRO SILICONE 7MM The BGM Pro silicone ignition cable is a real professional product. The tinned copper wire with 1,5mm² enables a powerful spark under every condition. It is suitable for retrofitting on every motor and offers the following advantages compared to a standard PVC cable: High voltage resistant up to over 50000V (50kV) Heat resistant up to 200 ° (fire protection class FT-1 / VW-1) Copper core [...]