Replacement piston for the BGM PRO150ccm cylinder for Vespa Wideframe. Here in the 1st oversize with 57.5mm. The cylinder must be ground / honed to this dimension by an engine reconditioner. The piston has the correct undersize for the grinding dimension 57.5mm in order to obtain the correct piston clearance. Ideal for repairing a defective cylinder. bgm - item number: [...]

BGM flywheel nuts are made from high quality 42CrMo4. This material is extremely tensile and clearly surpasses the quality of the original nut. A tight fit of the pole wheel is ensured at all times by the high possible tightening torque. Tightening torque pole wheel nuts M10 / M11 (V50, PV, ET3, PK S, Sprint, VBB ...): 45-50 Nm M12 (PX, Rally, GS160, SS180, T5, Cosa, PK XL): 60-65 [... ]

A well-functioning electronic ignition is heavily dependent on whether the trigger surfaces of the pole wheel are precisely aligned with the induction lugs of the pickup on the ignition base plate. Due to the addition of manufacturer tolerances (e.g. different cone angle, different construction heights) it can happen that this alignment is no longer given. This steel plate set can be an inexpensive and quick solution. In order to [...]

Idle jet set -BGM PRO Dellorto 4mm- (30-52) - (30-32-35-38-40-42-45-48-50-52) bgm - item number: 7671256 Availability: in stock (Please check availability here in Scooter Center Shop) Weight: approx. 0,04 kg Category: Engine> Carburetor> Carburettor nozzles Other customers who wanted auxiliary jet set -BGM PRO for Dellorto (type: 11600) 4mm- (30-52) (30-32- 35-38-40-42-45-48-50-52), also looked for: auxiliary jet set [...]

bgm - Item number: BGM8505S Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,01 kg Category: Engine> Service> Carburetor components Other customers who are interested in float needle -BGM PRO- for Keihin PWK 20, 22, 24, 26, 28, Polini CP Ø = 17,5-24mm, Polini 28, 30, 32, 34 are interested, also looked for: [...]

Float needle BGM PRO Viton ® for Dell'Orto carburettor The float needle regulates the flow of petrol into the carburettor. If the float needle is defective, the carburetor overflows and the gasoline drips onto the floor and / or into the engine. The result is often a poorly starting and smoking engine. If the carburettor is revised, it is therefore useful [...]

BGM screw / clamp nipples are manufactured by a supplier for the Japanese motorcycle industry in excellent quality. The dimensions correspond exactly to the old originals from Piaggio / Innocenti. This guarantees a perfect fit. As in the original, the clamping screws for the shift cables have an internal plate. This protects the inner cable of the Bowden cable and helps to [...]

Special tool - Made in Germany Dismantling tool for bearing type NBI253815. Suitable vehicles: Vespa PX, Cosa, Sprint Veloce. PK ETS Is used to remove the needle bearing cage of the crankshaft bearing from the small engine housing. To do this, dismantle the small motor half, remove the shaft seal and insert the tool from the shaft seal side. Heat the motor housing and remove the bearing with light blows.

BGM PRO shaft seals made of high-quality and ethanol-resistant (E10) FKM / Viton® * WHY FKM / VITON® The material FKM (fluorocarbon rubber) is extremely heat, friction and fuel / ethanol resistant. Current premium fuel in Germany already contains up to 5% ethanol admixture per se. In other countries the ethanol / alcohol content is even higher. Conventional shaft seals can swell or soften when they come into contact with fuels containing ethanol. [...]

BGM small parts for the brake cable fastening are manufactured by a supplier for the Japanese motorcycle industry in an excellent quality. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. The high quality of the material enables reliable fastening of the brake cable. Also available as practical workshop sets (10 pieces) bgm - item number: BGM6486X Availability: in stock [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]

Lambretta bgm PRO MRB RaceTour piston kit with 65 mm diameter. Complete piston kit consisting of: piston, two steel piston rings a 1 mm thick, piston pin and clips. The piston is manufactured exclusively by the Meteor company. The piston is primarily intended as a replacement piston for the bgm RaceTour cylinder, but can also be used as a conversion piston.