MAIN IMPORTERS

CENTRAL EUROPE

THAILAND

ITALIAN

JAPAN

UNITED KINGDOM

NORTH AMERICA

SPAIN

RANDOM PRODUCTS

Grip, cornering, directional stability, handling, wheelspin, braking behavior? All of these are demands that your chassis must be able to cope with. bgm offers the right damper for every application. The bgm PRO series offers you high tech at its best. You can not only adjust the spring tension of the black and white gas pressure shock absorbers to your individual needs, they also offer you [...]

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus, for pure measurement purposes, neither the crankshaft nor new bearings are stressed. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1202TL Availability: in stock (Please check the [...]

Piaggio specific plug with enclosed contact clamps. A defective cable harness can be repaired or cable branches or entire cable harnesses can be created yourself. Simply connect the cables to the plug contact (crimp or solder with the appropriate pliers) and then push them into the plug. The contact locks in automatically and is then permanently connected to the plug. Two contacts: [...]

We recommend BGM Pro Street gear oil (BGM2025, corresponds to specification API GL-3) as a lubricant. bgm - Item number: BGM6224G Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,23 kg Category: Motor> Clutch> Gearbox Other customers who are looking for clutch pinions -BGM PRO- Vespa Cosa2, PX (1995-), BGM Superstrong, [...]

Mirror from BGM PRO for handlebar mounting on classic Vespa scooters The BGM PRO mirrors have an ideal ratio between arm length and mirror surface. With a mirror surface of just 95mm, the optics harmonize perfectly with classic scooters. The length of the mounting arm was measured so (250mm) that there is always a perfect view to the rear. He protrudes [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

Plastic storage dummy. This allows the crankshaft to be mounted and moved in the engine housing on a trial basis and without any effort. Thus neither the crankshaft nor new bearings are stressed for pure measurement purposes. Ideal to control the control angle of the crankshaft (rotary valve inlet) or the cylinder (exhaust angle, overcurrent angle). Made in Germany (US) bgm - Item number: BGM1200TL Availability: out of stock (Please check [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

BGM adjusting screws are manufactured in an excellent quality by a supplier for the Japanese motorcycle industry. The dimensions correspond exactly to the old originals from Piaggio. This guarantees a perfect fit. As in the original, the adjusting screws have an extra high lock nut. The size M7x25mm is suitable for use as an adjusting screw for the rear brake cable on the engine.

Speedometer BGM PRO 160km / h for Vespa PX (years of construction 1977-1984) The BGM PRO speedometer has a precise eddy current measuring mechanism with a display range of up to 160km / h (series speedometer = 120km / h). It replaces the factory-installed speedometer 1: 1. Today's engine and transmission technology enables concepts that bring the series tachometer to its limit in third gear. The BGM Pro [...]

bgm - Item number: BGM6482BLX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Brakes> Brake pedals Other customers who are interested in clamping plate bolts Ø = 5x18mm + split pin, Brake pedal -BGM ORIGINAL- Vespa VNA, VNB, VBA, VBB, Super, GL, GT, GTR, TS, Sprint, GS, SS, Rally, PX - [...]

Suitable for a load of 1,2 to max. 10 watts. Therefore ideal for LED indicators. Therefore not suitable for handlebar end indicators with festoons with more than 10 watts. Please use C7145 or 1010030 here (see 'alternatives'). bgm - item number: BGM6202 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Frame