bgm - Item number: 3332778KTS2 ​​Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 1,59 kg Category: Frame> Body> Frame parts Other customers who are looking for edge protection including step plate set -BGM ORIGINAL- Vespa PK S, PK S Lusso, PK SS, PK ETS - plastic - silver are interested, also looked for: [...]

TNT Vario cover NEW STYLE -CHROME- Minarelli MA & MY. The chrome-plated vario cover from TNT is like a mirror, but not only glitters beautifully in the sun, it also creates a breathtaking look. bgm - Item number: BGM4915 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,91 kg Category: Motor [...]

bgm - Item number: SC5011 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Rubber parts> Rubber parts Other customers who are interested in rubber motor / cable -BGM ORIGINAL- Vespa PK (used for cable feedthrough engine housing / ignition base plate) are also looking for: rubber | Engine | Cable | Rubber buffer [...]

If a crankshaft with a longer stroke is used, this additional stroke has to be compensated for for two reasons. On the one hand due to the mechanical conditions to prevent the piston from hitting or the engine runs too highly compressed, on the other hand to keep the control angle of the cylinder, which determines the performance, within a reasonable range. If the stroke is extended, [...]

0 bgm - Item number: 7673412 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Engine> Carburettor> Diaphragm plates Other customers who are interested in membrane plates -BGM PRO- type Yamaha RD350 YPVS - GRP platelets are of interest, also searched for: Membrane platelets | Membrane plate | Flutter valve | Membrane plates | Diaphragm block plate [...]

High quality electric cable with robust PVC sheath. Available in many different colors, such as those used in Piaggio vehicles. Available in cable cross-sections of 0,85mm² and 2,0mm². Outside diameter 0,85mm² = Ø2,3mm outside diameter 2,0mm² = Ø3,1mm Cable type: Single core Insulation: Special PVC according to DIN ISO 6722 and LV112 Temperature range: -40 to + 120 ° C Conductor: Bare copper wire Length: 10 meters [... ]

bgm - Item number: BGM2585 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Carburettor> Spacer Other customers who are looking for intake manifold spacers -BGM PRO Malossi / Polini-Vespa PX80, PX125, PX150, PX200, Sprint, Rally180 (VSD1T), Rally200 (VSE1T) - 6mm are interested, also looked for: Intake manifold spacer | Spacer [...]

Washer on crankshaft under clutch from bgm Pro The washer between crankshaft and clutch has three very important tasks to fulfill: Establishing the controlled preload between crankshaft and ball bearing Providing a plain bearing surface for the clutch pinion during operation of the clutch The correct distance between the clutch and the Manufacture bearings so that the gearing with [...]

Our BGM Pro nozzle and needle sets make the work of adjusting the carburetor much easier. The nozzle sizes extend over a wide range. This means that the right nozzle should always be with you. The practical boxes are a pleasant side effect, so the nozzles are always in the right place and the hours of rummaging through mountains of nozzles are finally over [...]

When choosing crankshaft bearings, you should always pay attention to high quality. We have put together BGM ORIGINAL bearing sets for you. In addition to quality bearings, the kit also contains high-quality shaft seals. Each part of the bearing set is at least at the original manufacturer level. Shaft seals in this set are supplied exclusively by Corteco, ball bearings from renowned European [...]

bgm - Item number: BGM7983 Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 1,80 kg Category: Frames> Wheels> Rims Other customers who are interested in rims -BGM PRO, tubeless, 2.10 -10 inch aluminum- Lambretta LI series 1-3, LI S, SX, TV series 2-3 - silver are interested, also looked [...]

bgm - Item number: BGM6887S35 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,09 kg Category: Engine> Rubber parts> Carburettor connecting rubbers Other customers who are interested in connecting rubber with flange inlet system -BGM ORIGINAL Smart Flow- AW = Ø35mm, hole stitch = 60mm - PHBH28 / 30, VHST24-26, VHSH30, TMX27-30, TM28, PWK28, Polini24-30 are interested, also looked for: [...]