Speedometer BGM ORIGINAL 120km / h for Vespa PX (years of construction 1977-1984) Very nice reproduction of the original speedometer for the old Vespa PX models ('77 -'84). Has a precise eddy current measuring mechanism. The speed display is therefore pleasingly accurate *. Visually very close to the original, the BGM ORIGINAL speedometer also has an odometer with a hundred meter counter. The speedometer lighting uses, deviating [...]

MATERIAL The bgm PRO Touring crankshafts are forged. The material is denser, which means that it dissipates heat better and is therefore more resistant to distortion. In addition to the crank webs, the connecting rod is forged and then CNC machined. STORAGE The lower connecting rod bearing is lubricated via two large lubrication slots and a total of four additional pockets on the side. The SSC racing camp and [...]

bgm - Item number: 4350032 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Frames> Trains> Cable pulls Other customers who are interested in train universal -Ø = 1,2mm x 2500mm, sleeve = 2200mm, nipple Ø = 3,0mm x 3mm - used as throttle cable - braided PE - gray are of interest, also looked for: [...]

BGM PRO speedometer cables correspond to the factory specification and impress with their high quality and low price. All speedometer cables have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as a high-quality outer shell or a properly pressed square. The installation of the already greased speedometer cable is easy.

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

bgm - Item number: BGM77TL Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Fork> Tools Other customers who are interested in tools for spring preload -BGM PRO- series for Shock absorbers of the series BGM PRO R12, BGM PRO SC / R12, BGM PRO SC / F16 [...]

bgm - Item number: BGM2105SC Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Engine> Exhaust> Exhaust inner pipes Other customers who are interested in clamps for exhaust pipes -BGM PRO Clubman V1.0. 4.0-V1- Lambretta series 3-XNUMX are also looking for: Exhaust manifold clamp | Clamp | Exhaust clamp | Exhaust manifold clamp | Hose clamp [...]

BGM PRO wire rope hoists correspond to the factory specification and impress with their high quality and low price. All trains have vehicle-specific lengths and can therefore be installed directly without rework. Particular attention was paid to high-quality details such as double-pressed end sleeves, burr-free nipples or tinned wire ends. Installation is quick and easy. To the [...]

This practical bgm Pro dosing bottle fulfills two tasks: on the one hand it serves as a storage container for amounts of up to 500 ml and at the same time small amounts can be dosed very easily and quickly. The upper dosing chamber is filled simply by pressing the lower body of the bottle and has graduation marks in 5 ml increments up to 25 ml.

bgm - Item number: BGM2225G Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,10 kg Category: Engine> Seals> Seals Other customers who are interested in cylinder gasket set -BGM PRO MRB-Racetour 225 ccm Lambretta TV 200, SX 200, DL 200, GP 200 are also looking for: Seal kit | Cylinder [...]

BGM PRO Superstrong clutch linings type CR Suitable for retrofitting all clutches of the COSA2 type (exception: BGM Superstrong CR) for Vespa Largeframe (PX / Cosa / T5, Rally etc.) This CR lining set contains: 3x clutch discs with two sides, 1x one-sided clutch disc 4x Clutch steel disks This makes it suitable for all Vespa largeframe clutches of type COSA2 (exception: BGM Superstrong [...]

bgm - Item number: BGM2750 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Motor housing> Studs Other customers who are interested in motor housing bolts - M7 x 50mm -BGM ORIGINAL- Vespa Largeframe standard (1957-) were also looking for: engine housing bolts | Motor housing studs | Set | Motor screw set | [...]