LED rear light reflector for the Lambretta. Thanks to modern LED technology, the power consumption is significantly lower than with conventional two-filament lightbulbs. This results in a better light yield for the entire system, and there is no break in the lighting effect when the brake light is activated. These are two phase LEDs. This means that each LED is used for the rear and brake lights and [...]

Open intake manifold for Minarellis with horizontal cylinder Intake manifold with a small connection, suitable for the carburettors with a small connection width (Areche 17,5 - 21 mm, Dellorto 12 - 19 mm). The result is better acceleration values ​​and freer turning and thus higher top speed. Very subtle, since the original airbox [...]

This kit shifts the pivot point of the shock absorber to the height of the wheel center. This controls the shock absorber directly, without any translation. This improves both the responsiveness as well as the originally very strong tendency to brake nod. The damper does not hit as quickly, the vehicle is safer to drive. The driving behavior is already very close with this kit [...]

BGM primary gears are bulletproof. Developed for the enormous power and torque of today's engines, they are made of high-alloy steel (SCM415 / 15 CrMo 5) according to the highest manufacturing standards. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) offers a reassuringly secure basis for the production of BGM primary wheels. The production meets the high [...]

BGM chain sprockets are developed for the enormous powers and torques of today's engines. Made from high-alloy SCM415 / 15 CrMo 5 steel. The extremely high strength of the base material (up to 1100N / mm2, HRC 58-62) provides a reassuringly secure basis for the production of BGM pinions. The production meets the high standard for transmission production by Honda. Each [...]

bgm - Item number: BGM4751G Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Workshop requirements> Electronics Other customers who are interested in Bougie pipe -UNIVERSAL Ø = 10mm- 5m - gray , also searched for: Bougierohr | Heat shrink tubing | Insulating tube | Electrics | Management | Wiring harness | Cable hose | Cable harness hose [...]

PRIMARY KIT BGM PRO EXTRA LONG Motors with a lot of torque and an early power peak choose the straight-toothed clutches that also require a straight-toothed primary gear (also available as a set with clutch). This enables very long reductions to be achieved. Also perfectly suitable if the overall transmission ratio is changed in very sporty engines with a modified auxiliary shaft and shorter gear steps.

Brake pads BGM PRO Sintersport - massive stopping power The BGM PRO sintered brake pads are a new generation of pads. It is all-metal brake pads that are manufactured in a complex sintering process. With these pads, braking performances are achieved that meet the highest demands. QUALITY The BGM Pro brake pads are manufactured exclusively for BGM by one of the most renowned Italian brake pad manufacturers. [...]

BGM ignition base plates and ignition kits are the solid basis for a high-quality engine. The powerful alternator guarantees perfect light output, the HQ ignition components a clean and powerful engine. Ideal for upgrading a decrepit, contact-controlled electrical system to a modern, maintenance-free high-performance ignition. ADVANTAGES: High light output due to maximum number of windings Proven excitation coil with copper plate for maximum reliability Pickup with [...]

The bgm PRO assembly stand is ideal for maneuvering the scooter when its engine is removed. The assembly stand acts as a maneuvering aid and makes the scooter chassis extremely manoeuvrable thanks to the smooth-running industrial castors (shopping cart principle). To do this, the assembly stand is simply attached to the mounting points of the motor (the corresponding bolt for attaching is of course included). The scooter thus receives [...]

bgm - Item number: BGM6482BLX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frames> Brakes> Brake pedals Other customers who are interested in clamping plate bolts Ø = 5x18mm + split pin, Brake pedal -BGM ORIGINAL- Vespa VNA, VNB, VBA, VBB, Super, GL, GT, GTR, TS, Sprint, GS, SS, Rally, PX - [...]

bgm - Item number: 7671525 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Engine> Clutch> Spacer Other customers who are interested in Spacer clutch cover -BGM PRO- V50, PV125 , ET3, PK50, PK80, PK125 - 1,0mm, also searched for: Spacer | Clutch cover | Spacer | Distance seal [...]