MAIN IMPORTERS

CENTRAL EUROPE

THAILAND

ITALIAN

JAPAN

UNITED KINGDOM

NORTH AMERICA

SPAIN

RANDOM PRODUCTS

bgm - Item number: BGM4500 Availability: in stock (Please check the availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Frame> Brakes> Brake-clutch levers Other customers who are interested in brake lever set -BGM PRO CNC Sport, short (130mm) - Vespa GT, GTL, GTS 125-300 - black are interested, also looked for: brake lever | Brake handle | Lever [...]

bgm - Item number: BGM0331 Availability: not in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,05 kg Category: Motor> Crankshaft> Ball bearings Other customers who are interested in connecting rod bearings -BGM ORIGINAL (12x16x15mm) - CPI 50 cc (Euro 2), Peugeot 50 cc (horizontal cylinder) are interested, also looked for: connecting rod bearings | Needle roller bearings | [...]

Connection rubber for membrane kit bgm PRO for carburettors with a passage width of up to 30mm and 34mm outer diameter: Suitable for Dellorto PHBH 28-30, VHSA 28, Mikuni TM27, TM 30, Keihin PWK 28 bgm - Article number: BGM2514 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Motor> Rubber parts> [...]

bgm - Item number: BGM2310M Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,02 kg Category: Motor> Gearbox> Variomatic slide shoes Other customers who are interested in Vario slide shoe set -BGM PRO- suitable for BGM2311, BGM2312 are also looking for: Vario | Sliding shoe | Set | Sliding shoes | Riser guide | Vario guide | [...]

BRAKE CALIPER SET BGM PRO RADIAL suitable for LML Star / Stella -MAXIMUM DECELERATION WITH MAXIMUM SAFETY- BRAKE CALIPER BGM PRO 4-PISTON RADIAL The BGM PRO 4-piston brake caliper increases the effective piston and pad area of ​​the front brake system and thus enables braking performance at motorcycle level. With 4x25mm brake pistons, the BGM PRO brake caliper has 40% more piston area than a conventional two-piston brake caliper [...]

bgm - Item number: BGM8310L Availability: out of stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,20 kg Category: Engine> Clutch> Clutches Other customers who are looking for Spacer clutch cover -BGM ORIGINAL- Vespa 125 , VN1T (60001-), VN2T, Vespa 150 VL1T, VL2T, VL3T, VB1T, ACMA 150 GL (1956-1958) - Ø = 130 × 1.5mm are of interest, [...]

The centrifugal weights in the variator are wearing parts and must be changed at regular intervals depending on the load (wear check approx. Every 5000 km). Wear of the rollers is characterized by a flattening on one side, the rollers can then no longer slide properly in the runway of the variator. This results in poor acceleration and often also a lower [...]

The bgm PRO silent rubbers improve the driving behavior through a much more precise guidance of the motor in the frame. The reinforced rubbers have asymmetrical degrees of hardness. Therefore, the driving comfort is maintained despite the tighter suspension. With the reinforced bgm engine silent rubbers supplied in pairs, the chassis gains directional stability, steering precision and rigidity. The assembly is easy and offers eg [...]

SILENT RUBBER BGM PRO FOR MOTOR HOUSING MOTOVESPA The motor housings of the Motovespa largeframe models have their own type of silent rubber for the motor crossbar. The dimensions of the BGM PRO silent rubbers correspond completely to the original Motovespa crossbar rubbers that are no longer available. Replaces 1: 1 the original Motovespa silent rubbers in the motor housing (front) Set for left and right side Comfortable rubber compound with [...]

The pole wheel of the V50, PV125, ET3 etc. is flatter than that of the later PK models. Anyone who converts their engine to modern ignition technology (or swaps the entire engine) will no longer get the old original fan wheel cover installed. This is where our spacer comes in, which separates the cover from the pole wheel. Simply place between the cover and the motor housing [...]

Very high quality cast cylinder kit made from a special gray cast alloy. Here you will find an inexpensive cylinder kit in the very best original equipment manufacturer quality. The cylinder corresponds in all details to the original part and is therefore a very good choice if a surprising upgrade has to be made to 50 cc or the original cylinder has stretched the wings. Processing and quality of cylinder and [...]

BGM PRO Superstrong 2.0 CR - the original, now with Ultralube Extremely resilient coupling, very easy to use - Made in Germany The Superstrong 2.0 CR coupling combines extreme durability, absolute reliability and easy operation. It is the basis of any solid engine tuning. The massive, CNC manufactured clutch basket has excellent concentricity and a [...]