MAIN IMPORTERS

CENTRAL EUROPE

THAILAND

ITALIAN

JAPAN

UNITED KINGDOM

NORTH AMERICA

SPAIN

RANDOM PRODUCTS

Complete replacement piston kit. bgm - Item number: BGM9970 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,12 kg Category: Engine> Cylinders> Pistons Other customers who are interested in pistons -BGM PRO 70 cc Sport- Sym 2-stroke - 47,0mm are also interested in: Pistons | Cylinder piston | Piston | [...]

The bgm PRO clutch steel discs are manufactured exactly flat and allow the clutch to be separated precisely. The clutch can be perfectly dosed thanks to the very good concentricity. Perfect concentricity No burrs Good controllability of the clutch Linings separate cleanly Suitable as a replacement for the original steel discs, no modifications necessary. We recommend BGM Pro Street gear oil as a lubricant [...]

bgm - Item number: BGM9977PI Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,03 kg Category: Engine> Cylinders> Pistons Other customers who are interested in pistons -BGM Original- Piaggio 125ccm AC 2 -Takt - 55,0mm - only interested in BGM9977, also looked for: Pistons | Cylinder piston | Piston | [...]

Complete BGM PRO rear brake cable with a strong Ø3mm inner cable diameter (Innocenti factory specification) and pressed cable holder on the outer shell. PROBLEM Ex works, the original cable often has play in the abutment, which means that it is not exactly at an angle to the cable stop. It is only pulled into position by the increased tensile stress during the braking process. This eats up a good part of the braking performance [...]

bgm - Item number: BGM6476TX Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,07 kg Category: Workshop supplies> Trains Other customers who are interested in end cap for outer cable -BGM ORIGINAL- Ø inside = 6mm - 10pcs. interested, also searched for: end cap | Outer cable | End cap | Pull sleeve | Pull cap | Sleeve | Grommet [...]

Speedometer glass incl. Decorative ring WHAT FOR Perfect repair kit for the speedometer. Either to replace a scratched / defective glass or to visually upgrade the speedometer. We also offer the sets in various designs. In our opinion, the tinted glass looks particularly elegant. HOW In the set is the speedometer glass ring that connects the speedometer glass and the speedometer [...]

BGM ignition base plates and ignition kits are the solid basis for a high-quality engine. The powerful alternator guarantees perfect light output, the HQ ignition components a clean and powerful engine, the BGM pole wheel an extremely quiet engine run. Ideal for upgrading a decrepit, contact-controlled electrical system to a modern, maintenance-free high-performance ignition. ADVANTAGES: High light output thanks to maximum number of windings Proven excitation coil [...]

Cylinder head gasket -BGM PRO- 2.0mm Polini 177ccm, DR 177ccm bgm - item number: 3820054 Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx who are for Spacer cylinder head -BGM ORIGINAL Polini / DR / Parmakit 0,02 cc- Vespa PX177, PX125, Cosa150, [...]

High quality ignition base from BGM. Specially developed for converting contact-controlled motors to maintenance-free electronic ignition. The base plate has been modified to fit the engine housing built before 1977 and has a longer cable branch so that the ignition base plate can also be perfectly mounted on older vehicles. After the conversion, the former 6Volt on-board network has [...]

bgm - Item number: BGM8015W Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,00 kg Category: Motor> Clutch> Ball bearings Other customers who are interested in disc for axial needle roller bearings AXK 1024 / NTB 1024 - AS 1024- (10x24x1mm) - (used for clutch pressure plate BGM8015) are also looking for: needle roller bearings [...]

Brake pads with high-quality organic pad material, suitable for the BGM pro 4-piston brake caliper (BGM2506SL / BGM2506BK). bgm - Item number: BGM2506PD Availability: in stock (Please check availability here in the Scooter Center Shop) Weight: approx. 0,15 kg Category: Frames> Brakes> Brake pads Other customers who are interested in brake pads -BGM PRO STANDARD- suitable for BGM PRO 4-piston radial brake caliper [...]

BGM gear shoulder rings are manufactured with high precision. They are hardened and ground plane-parallel to the hundredth of a millimeter. They therefore correspond exactly to the specified dimensions. The quality assurance guarantees a maximum deviation of only four hundredths of a millimeter undersize. This makes the BGM discs much more precise than Piaggio shoulder rings. WHY shoulder rings are used to compensate for the axial play between [...]